Hi All,
I have a cisco Cat 4006 newly installed. The switch is
working absolutly fine except the show module command
shows me the supervisor module is faulty. I have
attached the show module command out put & show
version command output. Is this some kind of bug with
Cisco 4006???
Regards
Sandeep
Mod Slot Ports Module-Type Model
Status
--- ---- ----- -------------------------
------------------- --------
1 1 2 1000BaseX Supervisor WS-X4013
faulty
2 2 48 10/100BaseTx Ethernet WS-X4148
ok
3 3 48 10/100BaseTx Ethernet WS-X4148
ok
WS-C4006 Software, Version NmpSW: 5.4(2)
Copyright (c) 1995-2000 by Cisco Systems, Inc.
NMP S/W compiled on Apr 7 2000, 17:05:03
GSP S/W compiled on Apr 07 2000, 15:17:58
System Bootstrap Version: 5.4(1)
Hardware Version: 1.1 Model: WS-C4006 Serial #:
JAB041704WT
Mod Port Model Serial # Versions
--- ---- ---------- --------------------
---------------------------------
1 2 WS-X4013 JAB041704WT Hw : 1.1
Gsp: 5.4(2.0)
Nmp: 5.4(2)
2 48 WS-X4148 JAF041300QM Hw : 2.3
3 48 WS-X4148 JAF041300QT Hw : 2.3
DRAM FLASH
NVRAM
Module Total Used Free Total Used Free
Total Used Free
------ ------- ------- ------- ------- ------- -------
----- ----- -----
1 65536K 31019K 34517K 16384K 4468K 11916K
480K 193K 287K
__________________________________________________
Do You Yahoo!?
Get Yahoo! Mail � Free email you can access from anywhere!
http://mail.yahoo.com/
___________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
