You can use either one on a 5300, but you won't get the full 64k support for
ISDN dialin if you use a channelized T. If you don't care about that and
the channelized is cheaper than the PRI (not in my area), then I would get
it. As for MPPP, it doesn't matter here either.
Rik Guyler
Principal Consultant
Cardinal Solutions Group, Inc.
513.984.6700
-----Original Message-----
From: Jason Swenson [mailto:[EMAIL PROTECTED]]
Sent: Wednesday, July 26, 2000 10:03 PM
To: [EMAIL PROTECTED]
Subject: MultiLink PPP AS5300
Can multilink ppp run using standard channelized T-1's or is PRI T-1's
required for setting a dial-in client up on a AS5300?
___________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
___________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
