John,
Do you have a sniffer? It might be alot easier to troubleshoot the problem
if you capture what exactly is transporting over your network.
Derek S. Winchester
Sr. Wan Engineer (CCNP)
Data Communications Department
[EMAIL PROTECTED]
Phone: 410-953-4887
Cell: 443-562-3456
-----Original Message-----
From: John Neiberger [mailto:[EMAIL PROTECTED]]
Sent: Thursday, July 27, 2000 4:30 PM
To: [EMAIL PROTECTED]
Subject: Ethernet Frame Errors
We have a Compaq file server connected at 100Mb full duplex to a switch.
They are directly connected by a single cable (7 ft.), and we are seeing
align errors and crc errors coming from the server. We've replaced the
cable and still see the errors.
What might be some other causes of these errors? This LAN is experiencing
other odd intermittent communications problems and I think these two
symptoms may be related, even though the error rate is less than 1%.
However, it should be 0%!
Thanks for any tips, this one has me stumped.
John
_______________________________________________________
Say Bye to Slow Internet!
http://www.home.com/xinbox/signup.html
___________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
___________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
