>From Cisco:
*************************************
Error Message
%RSP-2-BADCACHE: Overrun detected. End of MEMD buffer : 0x[hex] End of
datagram : 0x[hex] bufhdr [hex]: [hex] [hex] [hex] [hex] Flushing Processor
Cache
Explanation A packet was processed that was greater in size than the
maximum transmission unit size possible, or an illegal buffer header data
area was found.
Recommended Action Copy the error message exactly as it appears on the
console or in the system log, call your Cisco technical support
representative, and provide the representative with the gathered
information.
***************************
Can't reallly help you much, except to say copy the message exactly and call
TAC
Mike
>
>I have a 7500, and in the log files it is showing %RSP badcache flow flush
>overrun detected. I have searche Cisco's website and I have also looked
>through the errors log manual and I can't find a single thing. This has not
>affected the router in anyway can someone help me out here.
>
>___________________________________
>UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
>FAQ, list archives, and subscription info: http://www.groupstudy.com
>Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
________________________________________________________________________
Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com
___________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
