too bad , i will throw my 2503 out of window ,kiding..,thanks anyway
ElephantChild wrote in message ...
>On Sat, 29 Jul 2000, groupstudy wrote:
>
>> I got a cisco 2503 . I can't get access to the console except that i
can
>> see the information in the terminal window but can't not type .and
>> unfortunately I lost the telnet password and enable password.
>
>Do the same cable and terminal emulator work with other routers? If tey
>do, check that the cable is properly seated and that there isn't dirt in
>the console port on the router. If it still doesn't work, the router
>may be set up for software flow control, or hardware flow control, or
>none at all. Try fiddling with the flow control setup on your terminal
>emulator and see what happens.
>
>If you have a null modem cable, you may also try the aux port.
>
>> my question is whether doing a password recovery to this router without
>> getting access to the console port is possible ??
>
>No.
>
>--
>Bungee jumping and skydiving are for wimps. If you want to experience
>true gut-wrenching terror, have children. --Dusty Rhoades.
>
>___________________________________
>UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
>FAQ, list archives, and subscription info: http://www.groupstudy.com
>Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
>---
___________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
