Clayton,
Yes. You need to set up the port as either a
spanned port , or I believe 'monitoring port' in the
XL. I do this in my home lab to sniff the traffic,
which I suspect you are want to do. I hope this helps.
Reagrds,
Frank Zahrt, CCNP CCDP
NEC Senior Network Engineer
--- Clayton Price <[EMAIL PROTECTED]> wrote:
> Hello,
>
> Is it possible to configure a port to see all
> traffic on the backplane?
>
> I'm needing to install an ISS RealSecure Network
> detector on a subnet that
> is using a Cat 2924. The port the detector plugs
> into needs to see traffic
> from all the switch ports.
>
>
> Thanks in Advance,
>
> Clayton Price
>
>
> ___________________________________
> UPDATED Posting Guidelines:
> http://www.groupstudy.com/list/guide.html
> FAQ, list archives, and subscription info:
> http://www.groupstudy.com
> Report misconduct and Nondisclosure violations to
[EMAIL PROTECTED]
__________________________________________________
Do You Yahoo!?
Kick off your party with Yahoo! Invites.
http://invites.yahoo.com/
___________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
