If you are going to have someone console in locally, do this -
In rommon mode, type confreg, it will ask you if you want to change the
register, tell it yes. It will give you a bunch of options. Tell it yes
for change the console port speed. Set it for 115200.
That will disconnect you from the router. Set the hyperterm (or whatevery
you are using) for a port speed of 115200 and try again. You should be able
to get back in.
Try to do XModem then. It will be much faster (15/20min instead of 2hrs).
Once you do that and reload the router you'll have to telnet into it to
change the register back to 0x2102 and do a 'no line speed 115200' on the
console line.
That should get you up and running without doing a 2hr Xmodem.
Hope that helps,
Mike
>
>First time posting, so bare with me. Need help with this, I was doing IOS
>upgrade to a 3640 remote router. The router was downloading from TFTP
>server when it crashed. I am able to do a reverse telnet to if from a 7206
>aux port. I can't copy the 3640 IOS software to the 7206 flash, 7206 keeps
>disconnecting. I can go from a AS5200 aux to the 3640 console, but it
>won't reverse telnet for some reason.
>
>While I'm in reverse telnet to the 3640, I can change the confreg, but then
>it just keeps reloading. Any ideas?
>My last option is to have a local person go this morning, download tftp
>software and the IOS and try to boot tftp.
>
>We tried to do a remote Xmodem, but it timed out. We will be trying Xmodem
>locally today.
>
>Rodney Love
>Info Avenue Internet Service
>803.802.6508
>[EMAIL PROTECTED]
________________________________________________________________________
Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com
___________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
