I know you can set it to reload at a certain time, with the reload at command, but that will only allow you a quick reload. I use it all the time when I upgrade the IOS on the switches. Then I set them to reload during the middle of the night...
Don ----- Original Message ----- From: "Steve Wilson" To: Sent: Wednesday, March 26, 2003 2:49 AM Subject: RE: reload 3500XL switch [7:66222] > If all the complicated answers fail try putting a timer switch on the socket > that the device is powered from. > > Steve Wilson > Network Engineer > > -----Original Message----- > From: milind tare [mailto:[EMAIL PROTECTED] > Sent: 26 March 2003 04:54 > To: [EMAIL PROTECTED] > Subject: reload 3500XL switch [7:66222] > > hi cisco buddy's, > > > I hv 3500 series access switch's in my networ. In > that i need shutdown for some access switches. and > shutdown time is night time. so i can't do mannually. > > Can anyone suggest me is there any command so i can > get switch shutdown at specific time and it will start > automatically. if i mention particular time. > > Thanks & Regards, > Milind Tare > > __________________________________________________ > Do you Yahoo!? > Yahoo! Platinum - Watch CBS' NCAA March Madness, live on your desktop! > http://platinum.yahoo.com > [This E-mail scanned for viruses by Declude Virus] Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=66246&t=66222 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
