Hi everyone,

I am working on a Toll-Bypass project that involves two Cisco MC3810 routers
connected each with an Avaya Definity PBX G3Si via a channelized T1
interface. Both Cisco routers are VoIP dial-peers across the Internet cloud.

I am able to make VoIP calls between analog phone1 and phone2 connected to
the routers (see ASCII layout below). 

So far I haven't had much success making VoIP calls between a digital phone
connected to the PBX and an analog phone connected to routerB (nor routerA).

If anyone has implemented this type of configuration and can offer some
assistance, I'd be happy to forward further information, such as captured
debug and show command outputs, configuration files and diagrams for further
analysis.

Here is a simple layout of what I'm trying to implement:
------------------------------------------------------------------
                         analog          analog           
                         phone1          phone2 
                           |               |
Digital-----[PBX]~~~~~[RouterA]========[RouterB]------analog
phone    ^         ^              ^               ^   phone3
         |         |              |               |  
       cat3       CT1         Internet         FXS-port  

------------------------------------------------------------------

Below, there are relevant VoIP configuration lines on both routers:

routerA:
--------
controller T1 0
 mode cas
 framing esf
 linecode b8zs
 no yellow generation
 no yellow detection
 ds0-group 1 timeslots 1 type fxo-loop-start
!
voice-port 0:1
 timeouts call-disconnect 3
 connection trunk YYY3302997
 description PBX Analog Line Site1 XXX-550-4482
 codec g711ulaw
!
voice-port 1/1
 connection plar YYY3302998
 description DTC analog phone1 XXX-550-4498
!
dial-peer voice 4498 pots
 description :Analog line in Site1- port FXS 1/1
 destination-pattern XXX5504498
 port 1/1
!
dial-peer voice 4482 pots
 description :PBX Digital line in Site1 across CT1 line
 destination-pattern XXX5504482
 port 0:1
!
dial-peer voice 2997 voip
 description :Peer connection to Site2 Analog line YYY3302997 (FXS port 1/2)
 destination-pattern YYY3302997
 session target ipv4:172.21.1.5
 codec g711ulaw
 ip qos dscp 5 media
!
dial-peer voice 2998 voip
 description :Peer connection to Site2 Analog line YYY3302998 (FXS port 1/1)
 destination-pattern YYY3302998
 session target ipv4:172.21.1.5
 ip qos dscp 5 media
!

routerB:
--------

voice-port 1/1
 connection plar XXX5504498
 description Site2 local Phone YYY-330-2998
!
voice-port 1/2
 timeouts call-disconnect 3
 connection trunk XXX5504482 answer-mode
 description Site2 local Phone YYY-330-2997
 codec g711ulaw
 disconnect-ack
!
dial-peer voice 2998 pots
 description :Analog line in Site2 - port FXS 1/1
 destination-pattern YYY3302998
 port 1/1
!
dial-peer voice 2997 pots
 description :Analog line in Site2 - port FXS 1/2
 destination-pattern YYY3302997
 port 1/2
!
dial-peer voice 4482 voip
 description :Peer connection to Site1, PBX digital line XXX5504482
 destination-pattern XXX5504482
 session target ipv4:192.168.72.5
 codec g711ulaw
 ip qos dscp 5 media
!
dial-peer voice 4498 voip
 description :Peer connection to Site1 Analog line XXX5504498 (FXS port 1/1)
 destination-pattern XXX5504498
 session target ipv4:192.168.72.5
 ip qos dscp 5 media
!

Thanks,

Angel




Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=66299&t=66299
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]

Reply via email to