Thanks for your help gents, im sure though i am missing something here as i
have tried everything though i still seem to be missing something!!!!! Any
further ideas would be great & im stuck for moment!!
Here is my both configs & the #show int s0
When using debug ppp neg i get the following
R10-1603R#debug ppp neg
PPP protocol negotiation debugging is on
R10-1603R#
02:38:11: Se0 LCP: TIMEout: State Listen
02:38:11: Se0 LCP: O CONFREQ [Listen] id 166 len 14
02:38:11: Se0 LCP: AuthProto PAP (0x0304C023)
02:38:11: Se0 LCP: MagicNumber 0x06B8DFA1 (0x050606B8DFA1)
R10-1603R#
02:38:13: Se0 LCP: TIMEout: State REQsent
02:38:13: Se0 LCP: O CONFREQ [REQsent] id 167 len 14
02:38:13: Se0 LCP: AuthProto PAP (0x0304C023)
02:38:13: Se0 LCP: MagicNumber 0x06B8DFA1 (0x050606B8DFA1)
R10-1603R#no
02:38:15: Se0 LCP: TIMEout: State REQsent
02:38:15: Se0 LCP: O CONFREQ [REQsent] id 168 len 14
02:38:15: Se0 LCP: AuthProto PAP (0x0304C023)
02:38:15: Se0 LCP: MagicNumber 0x06B8DFA1 (0x050606B8DFA1)
R10-1603R#no debug
02:38:17: Se0 LCP: TIMEout: State REQsent
Router 9
R9-1601R#show run
Building configuration...
Current configuration:
!
version 12.0
service timestamps debug uptime
service timestamps log uptime
no service password-encryption
!
hostname R9-1601R
!
enable password cisco
!
username R10-1603R password 0 cisco
ip subnet-zero
no ip domain-lookup
ip host r1 192.169.1.1
ip host r2 192.169.2.2
ip host r3 192.169.3.3
ip host r4 192.169.4.4
ip host r5 192.169.5.5
ip host r6 192.169.6.6
ip host r7 192.169.7.7
ip host r8 192.169.8.8
ip host r9 192.169.9.9
ip host r10 192.169.10.10
ip host cat19 192.169.11.11
ip host r12 192.169.12.12
!
!
!
interface Loopback0
ip address 192.169.9.9 255.255.255.0
no ip directed-broadcast
!
interface Ethernet0
no ip address
no ip directed-broadcast
shutdown
!
interface Serial0
ip address 10.0.0.1 255.255.255.0
no ip directed-broadcast
encapsulation ppp
no fair-queue
ppp authentication pap
ppp pap sent-username R9-1601R password 7 121A0C041104
!
ip classless
!
banner login ^C Welcome to www.ciscorack.co.uk - R9 Cisco 1601R Series ^C
!
line con 0
exec-timeout 15 0
password d231303u
logging synchronous
login
transport input none
line vty 0 4
exec-timeout 15 0
password d231303u
login
!
end
Serial0 is up, line protocol is down
Hardware is QUICC Serial
Internet address is 10.0.0.1/24
MTU 1500 bytes, BW 1544 Kbit, DLY 20000 usec, rely 255/255, load 1/255
Encapsulation PPP, loopback not set, keepalive set (10 sec)
LCP Listen
Closed: IPCP, CDPCP
Last input never, output never, output hang never
Last clearing of "show interface" counters never
Queueing strategy: fifo
Output queue 0/40, 0 drops; input queue 0/75, 0 drops
5 minute input rate 0 bits/sec, 0 packets/sec
5 minute output rate 0 bits/sec, 0 packets/sec
0 packets input, 0 bytes, 0 no buffer
Received 0 broadcasts, 0 runts, 0 giants, 0 throttles
0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored, 0 abort
81 packets output, 1462 bytes, 0 underruns
0 output errors, 0 collisions, 45 interface resets
0 output buffer failures, 0 output buffers swapped out
70 carrier transitions
DCD=up DSR=up DTR=up RTS=up CTS=up
Router 10
R10-1603R#show run
Building configuration...
Current configuration:
!
version 12.0
service timestamps debug uptime
service timestamps log uptime
no service password-encryption
!
hostname R10-1603R
!
enable password cisco
!
username R9-1601R password 0 cisco
ip subnet-zero
no ip domain-lookup
ip host r1 192.169.1.1
ip host r2 192.169.2.2
ip host r3 192.169.3.3
ip host r4 192.169.4.4
ip host r5 192.169.5.5
ip host r6 192.169.6.6
ip host r7 192.169.7.7
ip host r8 192.169.8.8
ip host r9 192.169.9.9
ip host r10 192.169.10.10
ip host cat19 192.169.11.11
ip host r12 192.169.12.12
!
!
!
interface Loopback0
ip address 192.169.10.10 255.255.255.0
no ip directed-broadcast
!
interface Ethernet0
no ip address
no ip directed-broadcast
shutdown
!
interface Serial0
ip address 10.0.0.2 255.255.255.0
no ip directed-broadcast
encapsulation ppp
no fair-queue
ppp authentication pap
ppp pap sent-username R10-1603R password 7 05080F1C2243
!
interface BRI0
no ip address
no ip directed-broadcast
shutdown
!
ip classless
!
banner login ^C Welcome to www.ciscorack.co.uk - R10 Cisco 1603R Series ^C
!
line con 0
exec-timeout 15 0
password d231303u
logging synchronous
login
transport input none
line vty 0 4
exec-timeout 15 0
password d231303u
login
!
end
R10-1603R#sh int s0
Serial0 is up, line protocol is down
Hardware is QUICC Serial
Internet address is 10.0.0.2/24
MTU 1500 bytes, BW 1544 Kbit, DLY 20000 usec, rely 255/255, load 1/255
Encapsulation PPP, loopback not set, keepalive set (10 sec)
LCP Listen
Closed: CDPCP
Last input never, output never, output hang never
Last clearing of "show interface" counters never
Queueing strategy: fifo
Output queue 0/40, 0 drops; input queue 0/75, 0 drops
5 minute input rate 0 bits/sec, 0 packets/sec
5 minute output rate 0 bits/sec, 0 packets/sec
0 packets input, 0 bytes, 0 no buffer
Received 0 broadcasts, 0 runts, 0 giants, 0 throttles
0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored, 0 abort
83 packets output, 1494 bytes, 0 underruns
0 output errors, 0 collisions, 38 interface resets
0 output buffer failures, 0 output buffers swapped out
77 carrier transitions
DCD=up DSR=up DTR=up RTS=up CTS=up
""Jonathan V Hays"" wrote in message
news:[EMAIL PROTECTED]
> saunders1m wrote:
> > I have 2 routers connected back to back via a DTE - DCE crossover cable
and
> > i am trying to establish a ppp connection though i can't seem to make
the
> > connection and when i try using debug ppp authentication i get:
> >
> > 01:57:10: Se0 PPP: Treating connection as a dedicated line
> >
> > Is my config right???
> >
> > Router 1 (r9)
> >
> > username r10 password cisco
> > interface Serial0
> > ip address 10.0.1.1 255.255.255.0
> > no ip directed-broadcast
> > encapsulation ppp
> > no fair-queue
> > ppp authentication pap
> >
>
>
> Add "ppp pap sent-username r9 password cisco" to r9, and
> similarly to r10.
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=66502&t=66486
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
