""Larkin, Richard"" wrote in message news:[EMAIL PROTECTED] > I note the 4-port serial interface (NM-4T) is not supported on the 2600, but > I recall having an older image which did list the interfaces, but I can't > recall the image version. > > Does anyone know what version of IOS will support this module? > > Rik
I found the following link on CCO: http://www.cisco.com/en/US/products/hw/modules/ps2797/products_tech_note0918 6a00800a93f3.shtml#topic3 According to that page, that module is definitely not supported on the 2600 series unless you have a 2691. John Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=66525&t=66518 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
