Hi all,
I am facing a situation like this :
1. 2 routers connected back to back via serial connections and
4 loopbacks configured on both of them. IGRP is running as IGP
protocol. Soon after I configure BGP on them and advertising the
loopback networks, I could see the BGP routes in the routing table of R1
for a while and they disappear after sometime. But if the IGP is chosen
to be a classless protocol like OSPF/ EIGRP then everything seems to be
OK.
Is there anything that needs to be taken care of under this
circumstances?
Thanks,
Rajesh
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=66565&t=66565
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
