yes daniel cotts was right, the 1601 serial interface is a asyc/sync one and since you have one you're in luck! the only thing you're missing though is a cable that is db60 to rs-232. you can get these straight from a cisco reseller or off of ebay (though its hard to find these on ebay unless you look).
the configuration of a modem is an entire chapter of most books, so it depends on what you're looking to do with the modem. dial in, dial out, access the network behind the router or access the router itself? you can find configuration example in many books and also try searching cisco.com for 'modem router configuration' hope this helps, scott ""Diego Martmnez Boqui"" wrote in message news:[EMAIL PROTECTED] > Hi Scott, yes my router is a 1601 which has an integrated wic (async/sync > serial interface (db60). > > Ok, so you confirm to me that this connection is possible, the thing is that > I need some kind of instructions to do the connection. Do you know how to > do this or can you point me to some url where I can find step-by-step > instructions to configure this. > > Thanks a lot for your time and help. > ----- Original Message ----- > From: "Scott Roberts" > Date: Tue, 1 Apr 2003 19:51:34 GMT > To: [EMAIL PROTECTED] > Subject: Re: Router-to-external MODEM connection [7:66585] > > you'll need a WIC with a async/syn serial port, I know they're available for > the 1700's, but I'm not sure if the same wic will work in a 1600. then you > can specify the interface as async and connect up the modem with a > db60-rs232 cable. > > scott > > ""Diego Martmnez Boqui"" wrote in message > news:[EMAIL PROTECTED] > > Hello Steve, yes, I can do this using the aux port but my 1600 router does > > not have an aux port, I need to do this using my serial sync/async > > interface, I just don`t know how and have not found a document about this > > type of connection. > > > > Thanks for your help anyway > > > > Peace > > ----- Original Message ----- > > From: "Steve" > > Date: Tue, 1 Apr 2003 03:21:41 GMT > > To: [EMAIL PROTECTED] > > Subject: Re: Router-to-external MODEM connection [7:66585] > > > > this can be done look for cisco doc to connect external modem to aux port > > > > -- > > Regards, > > > > Steve > > > > > > ""Diego Martmnez Boqui"" wrote in message > > news:[EMAIL PROTECTED] > > > Hello Group. > > > > > > Is it possible to connect an external modem to a Cisco 1600 series > > > router? > > > > > > And if it is, then how is it done? > > > > > > Can I connect using the serial interface? > > > > > > Any link with step by step instructions? > > > > > > Thank you all! > > > -- > > > __________________________________________________________ > > > Sign-up for your own FREE Personalized E-mail at Mail.com > > > http://www.mail.com/?sr=signup > > Diego Martmnez Boqui > > > > -- > > __________________________________________________________ > > Sign-up for your own FREE Personalized E-mail at Mail.com > > http://www.mail.com/?sr=signup > Diego Martmnez Boqui > > -- > __________________________________________________________ > Sign-up for your own FREE Personalized E-mail at Mail.com > http://www.mail.com/?sr=signup Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=66718&t=66585 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
