By default the error messages and all other stuff is sent to the console. But if you type in "NO LOGGING CONSOLE" or any other command to send the logging to the buffer perhaps, you will have no error messages to monitor from the terminal connection. Check the configuration for config lines of this type.
Steve Wilson Network Engineer -----Original Message----- From: James Gosnold [mailto:[EMAIL PROTECTED] Sent: 04 April 2003 09:22 To: [EMAIL PROTECTED] Subject: RE: Debug display to VTY [7:66762] Hi, this seemed to do the trick, thanks. Just found it confusing as having gone through the various CCNA literature it seems to ram home that all you need enter is the 'terminal monitor' command and then debug what you need. This works on my home routers IOS 12.0 on Cisco 3000 but not on these 1721's at work (IOS 12.2). Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=66834&t=66762 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
