The best thing you can do now is to RMA the sup/msfc module. When we first did these upgrades on the campus, a couple of ours Went bad, and the RMA option was the only way to get it fixed.
Larry Letterman Cisco Systems -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Nuurul Basar Sent: Tuesday, May 27, 2003 7:59 AM To: [EMAIL PROTECTED] Subject: Re: How to upgrade CatOS to IOS [7:69538] thanks for the info, I have followed the infor frm TAC, and managed to replace the catOS with IOS. Sadly, on the step 18 which is format sup-bootflash and until the last step, reload. Well after reload...... it still go back to romon 1> :( on the dir bootflash: ---> no file was found. I try to boot via boot disk0:xxxxxx, it can read from disk0. when i do dir disk0/slot0. Error come out. So I end up with one dead sup eng. The best part is before I did the upgrade, I have configured the catOS to worked. Any idea how to solved this problem. Thanks ----- Original Message ----- From: To: "Nuurul Basar" Sent: Tuesday, May 27, 2003 1:02 AM Subject: Re: How to upgrade CatOS to IOS [7:69538] > > Hi, > > What is you MSFC, PFC model? > > > > > > > "Nuurul Basar" @groupstudy.com em 26-05-2003 > 11:55:42 > > Favor responder a "Nuurul Basar" > > Enviado Por: [EMAIL PROTECTED] > > > Para: [EMAIL PROTECTED] > cc: > > Assunto: How to upgrade CatOS to IOS [7:69538] > > > Hi, > > I need to changed the CATOS in my cat 6000 to IOS, have download the > IOS and reisde on a flash card. I have never done this process > before. Can some one advice me on the matters. > > Thanks > Nuurul Basar Mohd Baki > Network Engineer > DDSe Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=69584&t=69538 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
