Catherine, You forget to define ospf network type in each frame interface. Add this interface config command: ip ospf network point-to-point
Thank, Rivalino Exactly right but you will have to do 2 more things: 1)Since you changed the hello-interval to 30 on Router A's point-to-point subinterfaces you will have to do the same for Router B and Router C's interfaces. 2) Remove the neighbor statement from Router B and Router C's OSPF process. Not needed. So just add the "ip ospf network point-to-point on Routers B and C frame relay physical interface and do steps 1 and 2. Best of luck. Danny Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=70046&t=70025 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
