Well, the only route my router sees is the directly connected router's IP. This is due to the fact that we haven't gotten BGP up yet. Also, from what I know, the serial link is the only link sending out packets.
-----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Devrim Yener KUCUK Sent: Sunday, June 08, 2003 2:15 AM To: [EMAIL PROTECTED] Subject: Re: 40% Ping Success [7:70327] please verify where the packets are lost...(which layer...?) Like any routing issue..2 packets may be sent from one link and 3 may be from other.. or physical layer issue (like packet loss... ) cle counters and check sh int ser ..., sh controller.. which outputs are increasing regards devvvv ----- Original Message ----- From: "Nathan" To: Sent: Sunday, June 08, 2003 10:01 AM Subject: 40% Ping Success [7:70327] > Ok guys here's an interesting issue. Once we got the internet circuit > up, the ping was only 40% successful. Why would that be? > > Here's the setup: > > 3700 -> CSU/DSU -> DMARK -> SBC -> Service Provider. Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=70333&t=70327 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
