comments inline:
----- Original Message ----- From: "Iwan Hoogendoorn" To: Sent: Tuesday, June 10, 2003 11:20 PM Subject: RIP updates trough a serial and ISDN connection [7:70480] > Hi I have a question here: > > If i have 2 Routers and they are connected to the serial connection... > and the ethernet and the ISDN interfaces allso has a IP address. > AND THE ISDN LINE IS CONFUGRED AS BACKUP FOR THE SERIAL LINE. > (So is in standby mode (down))and all of the 3 interfaces have different > network numbers...lets say: > SER = 193.1.1.0 > ETH = 195.1.1.0 > BRI = 196.1.1.0 > > Only the Serial interfaces are UP and the ethernet and the BRI are > down...(the BRI is down because its in standy mode) > DOES RIP ALLSO BROADCAST ROUTES (NETWORK NUMBERS) WHERE TEH INTERFACES ARE > DOWN OF? -no.. > And if the answer is yes how does it know the Network number of ISDN if the > serial goes down...? -if you are using back-up interface then when the serial goes down, the isdn will not be in the standby mode any more. so any interesting traffic that you defined with the "dialer-group x" will trigger the isdn Regards Devvvv > Because it has to know the IP/NETWORK to take over the line right? > > Well i hop someone can help me with this one ...and sorry for my long > question... > > Thank You, > > Iwan Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=70488&t=70480 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
