This is a good one. I have a 3640 and a 1721 connected over point-to-point T1. Everything is up and up, no problems. Each of the routers listed above have another serial port. The 3640 is connected to an IBM host (9000) and the 1721 is connected to an ATM cash money machine (Diebold) (located at a bank). Everything on that circuit, which uses BSTUN tunneling through the HDLC is up and up...but I can not get the BSTUN peer groups to talk.
I know that this scenario is pretty vague, but any input would help. I have peer groups, and static routes. But when I do a show bstun all I get is the IP address of my peer, and the fact that the tunnel is closed. I can ping, telnet, everything else, but I can not get the BSTUN to show a valid connection. It is a simple point to point setup. Any ideas? When I do a debug BSTUN events, debug BSTUN packets, debug BSC events, and debug BSC packets on my router with the AS400 connected, I do not see any traffic. This is my secondary router. (Does the polling). Would this be a problem on the AS400 or router? Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=70582&t=70582 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
