Hi all, I've configured an E1/R2 on AS5300 for a customer. Actually this
E1/R2 is use for WAP(Wireless Application Protocol) testing, which is using
Nokia 7110 WAP cell phone to dial to the E1/R2 line. Basically Nokia 7110
WAP have 2 kinds of call type, first one is 'analog' and the second one is
'ISDN'. I managed to use 'analog' call type to dial in to the E1/R2 line but
not 'ISDN'.
Can I assume that the E1/R2 line cannot accept 'ISDN' call ???
I've checked with the Cisco TAC engineer about this issue, but they couldn't
conform to me whether E1/R2 can accept 'ISDN' call or not.
I hope someone can give me the answer on this.
Thanks in advance.
regard,
lee
___________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
