it really depends on how the ISP is dropping the T1 to you. What encapsulation they use etc. as far as the timeslots, you will need to go to the controller of the T1 blade and make channel group 0 and add all 24 timeslots to the channel-group. Otherwise you will only have a fractional T1.
channel-group 0 time-slots 1-24 the cablelength will only matter if you are a long way from the SmartJack (NIU) most of the time this is short ( 0-133 ft) Other than that, make sure your encapsulation is correct, HDLC, PPP etc. If it is still not coming up try debug serial interface and analyze the debug. It will tell you what the deal is hth, jim ----- Original Message ----- From: "LIU, JEFF" To: Sent: Monday, June 16, 2003 7:53 PM Subject: Port Adapter [7:70772] > I have PA-MC-8T1 installed on 7206. What is supposedly correct configuration > to support full t1 that is provided my ISP? The thing really gets me is the > timeslot and cable-length parameters. Please advise. > > > Thanx in advance! > > Jeff > > > > ***************************************************************** > This electronic message transmission contains information from the law firm > of > Dinsmore & Shohl which may be confidential or privileged. The information is > intended to be for the use of the individual or entity named above. If you > are > not the intended recipient, be aware that any disclosure, copying, > distribution or use of the contents of this information is prohibited. If you > have received this electronic transmission in error, please notify us by > telephone (1-800-934-3477) or by electronic mail ([EMAIL PROTECTED]) > immediately. > ***************************************************************** Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=70777&t=70772 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
