John,

I assume the '25' after each percentage sign in your original post below
is a typo (e.g., "15%25 of bandwidth"). Given that assumption, you want
to assign traffic to three categories, with 15%, 50%, and 35% of the 64
kbps bandwidth.

64000 x .15 =  9600 bps
64000 x .50 = 32000 bps
64000 x .35 = 22400 bps

> burst size should 1/8 of the bit rate cfg'd, no excess burst 

1/8 = .125

 9600 x .125 = 1200 bps
32000 x .125 = 4000 bps
22400 x .125 = 2800 bps

However, I question the burst size given in your solution. The
definition from the Doc CD states that the  burst-size is the "Sustained
number of bits that can be sent per INTERVAL. On Frame Relay interfaces,
this is the Committed Burst size contracted with your service provider.
"

See
http://www.cisco.com/univercd/cc/td/doc/product/software/ios122/122cgcr/
fqos_r/qrfcmd11.htm#1019905

If the interval is 1/8 second (and it may not be) I would think the
correct answer would divide each of 1200, 4000, and 2800 by 8, to get
bits per interval.

HTH,

Jonathan

> -----Original Message-----
> From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On 
> Behalf Of John Smith
> Sent: Wednesday, June 18, 2003 10:21 AM
> To: [EMAIL PROTECTED]; [EMAIL PROTECTED]
> Cc: [EMAIL PROTECTED]; 
> [EMAIL PROTECTED]; [EMAIL PROTECTED]; 
> [EMAIL PROTECTED]
> Subject: QoS - Enabling Traffic Shaping
> 
> 
> Somehow I have forgotten how to do math... Can anyone explain 
> to me or point to a doc on figuring out the percentage for 
> the below lab.
> 
> Enable traffic shaping on int serial 0/0 as follows:
> 
> Shape Telnet and ICMP traffic to 15%25 of bandwidth
> Shape FTP traffic to 50%25 of bw
> Shape all remianing traffic to 35%25 of bw.
> 
> Remember the total link bw is 64 kbps on this interface. The 
> burst size should 1/8 of the bit rate cfg'd, no excess burst 
> should be allowed.
> 
> The answer from the lab help are, below can anyone tell me 
> how the number 9600, 32000 and 22400 were arrived at? I can 
> figure out the 1/8th part 1200, 4000 and 2800, but somehow 
> can't remember how to get the original percentage..
> 
> traffic-shape group 101 9600 1200 1200
> traffic-shape group 102 32000 4000 4000
> traffic-shape group 103 22400 2800 2800
> 
> Thanks.
> 
> 
> 
> ---------------------------------
> Do you Yahoo!?
> SBC Yahoo! DSL - Now only $29.95 per month!
> 
> 
> ______________________________________________________________
> _________
> You are subscribed to the GroupStudy.com CCIE R&S Discussion Group.
> 
> Subscription information may be found at: 
> http://www.groupstudy.com/list/CCIELab.html




Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=70869&t=70869
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]

Reply via email to