Hi,

It looks like the IOS has given you the answer: "Command rejected: One
or more ports is already configured as a trunk port."

And the documentation confirms that you cannot configure multi-VLAN and
trunk ports on the same 2900XL/3500XL switch. See:

http://www.cisco.com/univercd/cc/td/doc/product/lan/c2900xl/29_35wc6/scg
/swvlan.htm#xtocid42

Regards,

Jonathan Hays


> -----Original Message-----
> From: milind tare [mailto:[EMAIL PROTECTED] 
> Sent: Wednesday, June 25, 2003 12:18 AM
> To: [EMAIL PROTECTED]
> Cc: [EMAIL PROTECTED]
> Subject: Re: IOS version [7:71225]
> 
> 
> Hi Jhays,
> 
> IT-3548-2#conf t
> Enter configuration commands, one per line.  End with
> CNTL/Z.
> IT-3548-2(config)#int fa0/22
> IT-3548-2(config-if)#swi
> IT-3548-2(config-if)#switchport mu
> IT-3548-2(config-if)#switchport mod
> IT-3548-2(config-if)#switchport mode mu
> IT-3548-2(config-if)#switchport mode multi ?
>   
> 
> IT-3548-2(config-if)#switchport mode multi
> Command rejected: One or more ports is already
> configured as a trunk port.
> IT-3548-2(config-if)#swit
> IT-3548-2(config-if)#switchport mu
> IT-3548-2(config-if)#switchport multi vl
> IT-3548-2(config-if)#switchport multi vlan add
> IT-3548-2(config-if)#switchport multi vlan add 2,4    
>                         
> 
> 
> i hv tried like this but still it is not working. 
> and my IOS version 
> 
> > IOS (tm) C3500XL Software (C3500XL-C3H2S-M),
> > Version
> > > 12.0(5)WC3b, RELEASE SOFTWA
> > > RE (fc1)                                          
> >    
> 
> so pls give me suggestion.
> 
> Thanks & warm Regards,
> Milind Tare
>        
> --- Jonathan V Hays  wrote:
> > milind tare wrote:
> > 
> > > Dear All,
> > > 
> > > 
> > >      I have 3500 series switches in my network. i
> > want
> > > to configure multiple vlan for some ports. right
> > now i
> > > am using following IOS
> > > 
> > > IOS (tm) C3500XL Software (C3500XL-C3H2S-M),
> > Version
> > > 12.0(5)WC3b, RELEASE SOFTWA
> > > RE (fc1)                                          
> >    
> > >            
> > >     i tried the command switchport multi vl but it
> > is
> > > not working in that. 
> > > 
> > >  so pleas give me suggestion. shall upgrade the
> > IOS.?
> > > 
> > > i hv 3512,3524,3548 switches in my network
> > > 
> > > 
> > > Thanks & Regards,
> > > Milind Tare             
> > > 
> > 
> > Please post a snapshot of your terminal session.
> > 
> > Are you in interface mode when you enter the
> > command?
> > 
> > Switch(config)# int fa0/1
> > Switch(config-if)# switchport multi vlan 2,4
> > 
> > 
> > 
> > 
> 
> 
> __________________________________
> Do you Yahoo!?
> SBC Yahoo! DSL - Now only $29.95 per month!
> http://sbc.yahoo.com




Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=71327&t=71225
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]

Reply via email to