I have a 2522 and a 1720.I want to setup the 2522 so that it will dial via a
serial port using a modem that is attached.I have a DB60 to DB25 DTE cable
for that.The router must dial the AUX port on the 1720 for use in out of
band management.The 2522 does not want to dial out.
Could someone please look at my config and maybe help.
Thanks
Cisco 2522
IOS (tm) 2500 Software (C2500-JS40-L), Version 11.3(6)T, RELEASE SOFTWARE
(fc1)
version 11.3
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
!
hostname router1
!
!
username router2 password 0
ip subnet-zero
chat-script test "" "ATDT\T" TIMEOUT 120 CONNECT \C
!
!
!
!
interface Loopback0
ip address 192.168.0.1 255.255.255.0
!
interface Ethernet0
no ip address
shutdown
!
interface Serial0
no ip address
no ip mroute-cache
shutdown
!
interface Serial1
no ip address
shutdown
!
interface Serial2
physical-layer async
no ip address
encapsulation ppp
bandwidth 9600
dialer in-band
dialer-group 1
async mode dedicated
!
interface Serial3
no ip address
shutdown
!
interface Serial4
no ip address
shutdown
!
interface Serial5
no ip address
shutdown
!
interface Serial6
no ip address
shutdown
!
interface Serial7
no ip address
shutdown
!
interface Serial8
no ip address
shutdown
!
interface Serial9
no ip address
shutdown
!
interface BRI0
no ip address
shutdown
!
interface Dialer3
ip unnumbered Loopback0
encapsulation ppp
dialer in-band
dialer idle-timeout 20
dialer map ip 192.168.0.2 name Router1 modem-script test broadcast
0125417453
dialer hold-queue 15
dialer load-threshold 1 either
dialer-group 1
no cdp enable
ppp authentication chap
!
ip classless
ip route 192.168.0.2 255.255.255.255 Dialer3
!
dialer-list 1 protocol ip permit
!
!
line con 0
line 2
modem InOut
modem autoconfigure type default
transport input all
autohangup
line aux 0
line vty 0 4
login
!
end
Dialer3 is up (spoofing), line protocol is up (spoofing)
Hardware is Unknown
Interface is unnumbered. Using address of Loopback0 (192.168.0.1)
MTU 1500 bytes, BW 56 Kbit, DLY 20000 usec, rely 255/255, load 1/255
Encapsulation PPP, loopback not set
DTR is pulsed for 1 seconds on reset
Last input never, output never, output hang never
Last clearing of "show interface" counters never
Input queue: 0/75/0 (size/max/drops); Total output drops: 0
Queueing strategy: weighted fair
Output queue: 0/1000/64/0 (size/max total/threshold/drops)
Conversations 0/0/256 (active/max active/max total)
Reserved Conversations 0/0 (allocated/max allocated)
5 minute input rate 0 bits/sec, 0 packets/sec
5 minute output rate 0 bits/sec, 0 packets/sec
0 packets input, 0 bytes, 0 no buffer
Received 0 broadcasts, 0 runts, 0 giants, 0 throttles
0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored, 0 abort
0 packets output, 0 bytes, 0 underruns
0 output errors, 0 collisions, 0 interface resets
0 output buffer failures, 0 output buffers swapped out
0 carrier transitions
Serial2 is up (spoofing), line protocol is up (spoofing)
Hardware is CD2430 in async mode
MTU 1500 bytes, BW 9600 Kbit, DLY 100000 usec, rely 255/255, load 1/255
Encapsulation PPP, loopback not set, keepalive not set
DTR is pulsed for 5 seconds on reset
LCP Closed
Closed: CDPCP
Last input never, output 00:08:54, output hang never
Last clearing of "show interface" counters never
Queueing strategy: fifo
Output queue 0/10, 0 drops; input queue 0/75, 0 drops
5 minute input rate 0 bits/sec, 0 packets/sec
5 minute output rate 0 bits/sec, 0 packets/sec
0 packets input, 0 bytes, 0 no buffer
Received 0 broadcasts, 0 runts, 0 giants, 0 throttles
0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored, 0 abort
240 packets output, 5760 bytes, 0 underruns
0 output errors, 0 collisions, 23 interface resets
0 output buffer failures, 0 output buffers swapped out
0 carrier transitions
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Cisco 1720
IOS (tm) C1700 Software (C1700-SY-M), Version 12.2(4)YB, EARLY DEPLOYMENT
RELEASE SOFTWARE (fc1)
Synched to technology version 12.2(6.8)T2
Current configuration : 1254 bytes
!
version 12.2
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
!
hostname router2
!
enable password
!
username router1 password 0
ip subnet-zero
!
!
no ip domain-lookup
!
chat-script Dialout ABORT ERROR ABORT BUSY "" "AT" OK "ATDT \T" TIMEOUT 45
CONNECT \c
!
!
!
interface Loopback0
ip address 192.168.0.2 255.255.255.0
!
interface BRI0
no ip address
shutdown
!
interface FastEthernet0
no ip address
shutdown
speed auto
!
interface Serial0
no ip address
shutdown
!
interface Async5
no ip address
encapsulation ppp
dialer in-band
dialer pool-member 20
async default routing
ppp authentication chap callin
!
interface Dialer10
ip unnumbered Loopback0
encapsulation ppp
dialer pool 20
dialer remote-name router1
dialer idle-timeout 900
dialer-group 1
ppp authentication chap callin
!
ip classless
ip route 0.0.0.0 0.0.0.0 Dialer10
no ip http server
ip pim bidir-enable
!
!
dialer-list 1 protocol ip list 101
!
!
line con 0
line aux 0
exec-timeout 0 0
script dialer Dialout
modem InOut
modem autoconfigure discovery
transport input all
stopbits 1
speed 115200
flowcontrol hardware
line vty 0 4
password
login
!
no scheduler allocate
end
Async5 is down, line protocol is down
Hardware is Async Serial
MTU 1500 bytes, BW 9 Kbit, DLY 100000 usec,
reliability 255/255, txload 1/255, rxload 1/255
Encapsulation PPP, loopback not set
DTR is pulsed for 5 seconds on reset
LCP Closed
Closed: BRIDGECP, IPCP, CCP, CDPCP, LLC2, BACP, IPV6CP
Last input never, output never, output hang never
Last clearing of "show interface" counters 6d02h
Input queue: 0/75/0/0 (size/max/drops/flushes); Total output drops: 0
Queueing strategy: weighted fair
Output queue: 0/1000/64/0 (size/max total/threshold/drops)
Conversations 0/0/16 (active/max active/max total)
Reserved Conversations 0/0 (allocated/max allocated)
Available Bandwidth 6 kilobits/sec
5 minute input rate 0 bits/sec, 0 packets/sec
5 minute output rate 0 bits/sec, 0 packets/sec
0 packets input, 0 bytes, 0 no buffer
Received 0 broadcasts, 0 runts, 0 giants, 0 throttles
0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored, 0 abort
0 packets output, 0 bytes, 0 underruns
0 output errors, 0 collisions, 0 interface resets
0 output buffer failures, 0 output buffers swapped out
0 carrier transitions
Dialer10 is up (spoofing), line protocol is up (spoofing)
Hardware is Unknown
Interface is unnumbered. Using address of Loopback0 (192.168.0.2)
MTU 1500 bytes, BW 56 Kbit, DLY 20000 usec,
reliability 255/255, txload 1/255, rxload 1/255
Encapsulation PPP, loopback not set
DTR is pulsed for 1 seconds on reset
Last input never, output never, output hang never
Last clearing of "show interface" counters 6d02h
Input queue: 0/75/0/0 (size/max/drops/flushes); Total output drops: 0
Queueing strategy: weighted fair
Output queue: 0/1000/64/0 (size/max total/threshold/drops)
Conversations 0/0/16 (active/max active/max total)
Reserved Conversations 0/0 (allocated/max allocated)
Available Bandwidth 42 kilobits/sec
5 minute input rate 0 bits/sec, 0 packets/sec
5 minute output rate 0 bits/sec, 0 packets/sec
0 packets input, 0 bytes
0 packets output, 0 bytes
Thanks alot.
_________________________________________________________________
Online - Offline - Day time - Night time. Buy and Sell - Aucor Auctions!
http://www.aucor.com
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=71436&t=71436
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
