Explanation This message indicates an underflow in the port ASIC transmit buffer. The first [dec] is the module number. The second [dec] is the ASIC port number.
Action If the error is limited to a single module, replace the module. If the error occurs several times, contact your technical support representative Hope this helps !!!!! :) -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Sent: Thursday, June 26, 2003 9:07 PM To: [EMAIL PROTECTED] Subject: Issue with 6509 [7:71468] Having a problem with 12 ports on one of our 6509's.. They are unable to pass traffic, and I get the following errors on the console. 2003 Jun 26 10:55:57 %SYS-3-SYS_LCPERR3:Module 6: Coil Pb Tx Underflow Error - Port #2: 2003 Jun 26 10:55:57 %SYS-3-SYS_LCPERR3:Module 6: Coil Pb Tx Underflow Error - Port #3: 2003 Jun 26 10:55:57 %SYS-3-SYS_LCPERR3:Module 6: Coil Pb Tx Underflow Error - Port #4: 2003 Jun 26 10:55:57 %SYS-3-SYS_LCPERR3:Module 6: Coil Pb Tx Underflow Error - Port #5: 2003 Jun 26 10:55:57 %SYS-3-SYS_LCPERR3:Module 6: Coil Pb Tx Underflow Error - Port #6: 2003 Jun 26 10:55:57 %SYS-3-SYS_LCPERR3:Module 6: Coil Pb Tx Underflow Error - Port #7: 2003 Jun 26 10:55:57 %SYS-3-SYS_LCPERR3:Module 6: Coil Pb Tx Underflow Error - Port #8: 2003 Jun 26 10:55:57 %SYS-3-SYS_LCPERR3:Module 6: Coil Pb Tx Underflow Error - Port #9: 2003 Jun 26 10:55:57 %SYS-3-SYS_LCPERR3:Module 6: Coil Pb Tx Underflow Error - Port #10: 2003 Jun 26 10:55:57 %SYS-3-SYS_LCPERR3:Module 6: Coil Pb Tx Underflow Error - Port #11: 2003 Jun 26 10:55:57 %SYS-3-SYS_LCPERR3:Module 6: Coil Pb Tx Underflow Error - Port #12: Does anyone know what this means? Thanks, Mario Puras SoluNet Technical Support Mailto: [EMAIL PROTECTED] Direct: (321) 309-1410 888.449.5766 (USA) / 888.SOLUNET (Canada) NOTICE - This message contains privileged and confidential information intended only for the use of the addressee named above. Any review, retransmission, dissemination, copying, disclosure or other use of, or taking of any action in reliance upon, this information by person or entities other than the intended recipient is prohibited. If you have received this message in error, please notify the sender by return email and delete this message. This message should not be copied or used for any purpose other than intended, nor should it be disclosed to any other person. Any views expressed in this message are those of the individual sender, except where the sender specifically states them to be the view of Investec Group, its subsidiaries or associates. The Investec Group is not liable for the security of information sent by e-mail at your request, nor for the proper and complete transmission of the information contained in the communication nor for any delay in its receipt. Please note that the recipient must scan this e-mail and any attached files for viruses and the like. The Investec Group accepts no liability of whatever nature for any loss, liability, damage or expense resulting directly or indirectly from the access of any files which are attached to this message. Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=71685&t=71468 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
