Here is a plain sample of a 3550 trunk config on one side...
interface FastEthernet 0/24
switchport trunk encapsulation isl
switchport trunk allowed vlan 1-158,160-4094
switchport mode trunk
no ip address
!
-Sal
simon watson wrote:
>
> Hi Guys
>
> A client wants a Cat 3550 configured for VLAN tagging, I have
> not done one
> of these before so how do I configure the switch, also there is
> a Cisco 2600
> router also connected to the switch.Do I need to configure the
> router to
> accomodate VLAN tagging (and any router that packets of the
> VLAN goes
> through ?)
>
> Thanks
>
> Simon.
>
>
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=71720&t=71703
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
