RSH command help please

[whatshakin]

Hey folks, I am going through the rsh commands on a 25xx router trying to figure out how I can get it to work with my NT server command prompt. I have been unable to get this to work thus far using numerous permutations and do not know why. Please look at the commands I used below and see if I have forgotten anything or if I misunderstand the usage parameters etc.   Feedback appreciated.   My router commands:   routerb(config)#ip rcmd rcp-enable routerb(config)#ip rcmd rsh-enable routerb(config)#username administrator nopassword routerb(config)#ip rcmd remote-host administrator 148.1.1.2 administrator enable routerb(config)#ip rcmd remote-user routerb   The relevant info:   *Routerb eth 0 IP: 148.1.1.4  Can ping it from NT box. *Logging in under NT with username administrator *IP of NT box 148.1.1.2 *Using command on NT box: rsh 148.1.1.4 -l administrator -n sho ver   Using the debug ip tcp rcmd the output is as follows:   01:49:16: RCMD: [514 <- 148.1.1.2:1023] recv 1022\0 01:49:17: RCMD: [514 <- 148.1.1.2:1023] recv Administrator\0administrator\0sho ver\0 01:49:17: RCMD: [514 <- 148.1.1.2:1023] recv -- administrator 148.1.1.2 Administrator not in trusted hosts database 01:49:17: RCMD: [514 -> 148.1.1.2:1023] send <BAD,Permission denied.>\n