Dear all I have a question about frame-relay. Network Diagram is below.
R1----* * *----R3 | * FR * | R2----* * *----R4 I configured a HSRP between R1 and R2, R3 and R4. R1,R3 are Active router.(R2,R4 are Standby router) And I configured standby track in a Wan side of R1,R3. When I disabled(shutdown the interface) the serial0/0 of R1 , then R2 became Active router. It's ok. But R3 didn't detect a down of Wan side,so serial0/0 of R3 is up-up. Therefore,I can't send a data between R2 and R4. Regarding Frame-relay configuration, I configured frame-relay in main-interface. Is it a mechanism of Frame-relay in main-interface ? I don't know in detail. Should I use sub-interface & point-2-point definition in frame-relay to use HSRP standby track ? Please explain me about this problem. Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=72166&t=72166 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
