Answeres C and D will both meed the requirments mentioned. There are FIVE
available VTY ports (0,1,2,3,4) , if they asked for 1 then then meant 1.
Kornel
> -----Original Message-----
> From: Chuck [SMTP:[EMAIL PROTECTED]]
> Sent: Sunday, August 06, 2000 11:13 PM
> To: Cisco@Groupstudy. Com
> Subject: Router Telnet Question....from the Sybex text
>
> I know that this is a trivial question, but I want to see that I get these
> questions and commands down pat. The Sybex CCNA 2.0 Study Guide text
> poses
> this question.
>
> Q."How do you only set your Telnet line 1 to a password of bob?"
>
> A. A. line vty 0 1
> Login
> Password bob
>
> B. line vty 0 4
> Login
> Password bob
>
> C. line vty 1
> Login
> Password bob
>
> D. line vty 1
> Password bob
> Login
>
> I answered with "C". The text says "B". The question asks for the telnet
> passwrod of "only" line 1. I checked the errata. I agree that B would
> set
> the password, but for lines 0-4 inclusive. Wouldn't "C" be the more
> correct
> answer?
>
> Thanks,
> Chuck
>
> ___________________________________
> UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
> FAQ, list archives, and subscription info: http://www.groupstudy.com
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
___________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
