Hi all, Quick question, I have enabled SPAN to mirror from one port to another. However, when doing so the transmitting port appears detached form the network. i.e.. I cannot ping from the PC attached to that port and nothing on the network can ping it too. When I remove the port from the session I get connectivity again. Could anyone give me any ideas on why this is occurring please.
I used the 'monitor session' command and left it blank at the end implying 'both' rather than explicitly specifying 'TX or 'RX. None of the ports are involved in trunking, they are in the same VLAN and they are on the same physical switch, and even on the same blade (4006). Any help would be greatly appreciated. Kind regards Paul .... Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=72507&t=72507 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
