Hey all - Has anyone ever successfully used RSPAN on a 3550? I saw the link that floated by a few days ago for the 6500 and I tried using that but I don't think I have everything correct because the traffic is looped back to the remote vlan but it is never mirrored out to the correct port on switch plugged into the Analyzer.
[Analyzer]----[Switch1]---Trunk---[Switch2] ----------------------------------------- Switch1 Config monitor session 1 source vlan 1 rx monitor session 1 destination remote vlan 500 reflector-port fa 0/16 monitor session 2 source remote vlan 500 monitor session 2 destination interface fa 0/12 Switch2 Config monitor session 1 source vlan 1 rx monitor session 1 destination remote vlan 500 reflector-port fa 0/16 ----------------------------------------- Thanks, Andrew --- http://www.andrewsworld.net/ ICQ: 2895251 Cisco Certified Network Associate "Learn from the mistakes of others. You won't live long enough to make all of them yourself." Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=72522&t=72522 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
