Thanks to all. We've isolated it to the house cabling extension. If i jack
the router directly to the niu the line comes up and runs error free. Crud,
I hate it when its not verizons fault :)
Thanks again,
Rusty
-----Original Message-----
From: Wilmes, Rusty
Sent: Saturday, July 19, 2003 8:39 AM
To: [EMAIL PROTECTED]
Subject: need input on a frame relay t1 problem [7:72621]
I've got a frame line thats almost 100% errors, mostly framing. Local
Hardware is a 1604 w/ t1 wic (for testing purposes only. will be a 3640.)
Remote hardware for the 6 pvc's are 1604's w/ t1 wics on fractional frame
lines. Remotes have existing pvcs back to the 3640 on the production
network.
PVCs come up but line protocol bounces continuously.
telco has reported that they can get to their network termination but not to
my csu. I've triple checked the extension from the NIU to the WIC and it
looks good. Its about 75 feet of shielded t1 cable. Tried both clock
source line and clock source internal. on clock source line I lose the pvcs
(deleted). Telco verified lmi type cisco (they had it at auto but changed
to cisco). I tried ANSI on my side and got no LMI rcvs. W/ type set to
cisco LMI enq/rcv is incrementing but drifting all over the place.
Interface resets increment each time I lose line protocol. Carrier resets
are incrementing slowly as well.
Im still suspecting telco issues but any input would be greatly appreciated.
interface Serial0
no ip address
encapsulation frame-relay
fair-queue 64 32 0
service-module t1 clock source internal
service-module t1 timeslots all
frame-relay lmi-type cisco
local-test#sho int s0
Serial0 is up, line protocol is up
Hardware is QUICC Serial (with FT1 CSU/DSU WIC)
MTU 1500 bytes, BW 1536 Kbit, DLY 20000 usec, rely 189/255, load 1/255
Encapsulation FRAME-RELAY, loopback not set, keepalive set (10 sec)
LMI enq sent 18, LMI stat recvd 11, LMI upd recvd 0, DTE LMI up
LMI enq recvd 0, LMI stat sent 0, LMI upd sent 0
LMI DLCI 1023 LMI type is CISCO frame relay DTE
Broadcast queue 0/64, broadcasts sent/dropped 76/0, interface broadcasts
66
Last input 00:00:08, output 00:00:00, output hang never
Last clearing of "show interface" counters 00:03:06
Input queue: 0/75/0 (size/max/drops); Total output drops: 0
Queueing strategy: weighted fair
Output queue: 0/1000/64/0 (size/max total/threshold/drops)
Conversations 0/1/32 (active/max active/max total)
Reserved Conversations 0/0 (allocated/max allocated)
5 minute input rate 0 bits/sec, 0 packets/sec
5 minute output rate 0 bits/sec, 1 packets/sec
19 packets input, 1466 bytes, 0 no buffer
Received 11 broadcasts, 0 runts, 0 giants, 0 throttles
1154 input errors, 89 CRC, 737 frame, 0 overrun, 0 ignored, 328 abort
99 packets output, 8280 bytes, 0 underruns
0 output errors, 0 collisions, 3 interface resets
0 output buffer failures, 0 output buffers swapped out
0 carrier transitions
DCD=up DSR=up DTR=up RTS=up CTS=up
local-test#
local-test#
local-test#
local-test#
local-test#sho frame lmi
LMI Statistics for interface Serial0 (Frame Relay DTE) LMI TYPE = CISCO
Invalid Unnumbered info 0Invalid Prot Disc 0
Invalid dummy Call Ref 0Invalid Msg Type 0
Invalid Status Message 0Invalid Lock Shift 0
Invalid Information ID 0Invalid Report IE Len 0
Invalid Report Request 0Invalid Keep IE Len 0
Num Status Enq. Sent 19Num Status msgs Rcvd 12
Num Update Status Rcvd 0Num Status Timeouts 8
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=72627&t=72621
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
