John,
I have come across ODR in production a couple of times. Up until
recently I had thought that ODR worked quite well for hub and spoke
topologies...
My most recent involvement with ODR occurred when replacing a 2621 with
a 3745, which was the hub of the hub-and-spoke topology. I quickly
learned that the 3745 doesn't enable CDP by default. I was also reminded
that Cisco doesn't save configuration commands that are considered
default...
What ended up happening was CDP was not enabled by default and when I
enabled it ("cdp run") the command wouldn't save because it was
considered a "default" command! Each time the router booted CDP was
disabled again!
I recommend to everyone that ODR not be used in a Cisco production
environment. You never know when an IOS (platform?) bug will render your
WAN unusable!
- Tom
John Neiberger wrote:
>
>
> I've never heard of anyone using ODR. Anyone here know of anyone using ODR
> in a production environment? Are there any environments where ODR is
> recommended over other options?
>
> John
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=72693&t=72380
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
