Hello,
Anyone knows if you need to do anything special on the tunnel link for
this to work? Like run tag-switching there for example?  
I have 2 cisco 2651xm acting as PE and have a GRE with IPSEC transport
mode between them.  The CE has all the routes to the other CE, mBGP look
good, everything look good from the show perspective, but I just can't
source ping or ping from one sun box behind one CE to the other one.
Any help would be greatly appreciated.

-luan

I have a set up like this:
cisco2621A----ethernet/BGP----PE1--------GRE/IPSEC-------PE2----Ethernet
/BGP---cisco2621C
running eigrp inside the tunnel to advertise the loopback.
PEs = 2651xm running 12.3.1a enterprise 3DES.
Traceroute die at the PE.

Here are some show routes

2621A#show ip route
Codes: C - connected, S - static, I - IGRP, R - RIP, M - mobile, B - BGP
       D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area
       N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2
       E1 - OSPF external type 1, E2 - OSPF external type 2, E - EGP
       i - IS-IS, L1 - IS-IS level-1, L2 - IS-IS level-2, ia - IS-IS
inter
area
       * - candidate default, U - per-user static route, o - ODR
       P - periodic downloaded static route

Gateway of last resort is 192.168.1.1 to network 0.0.0.0

     10.0.0.0/24 is subnetted, 2 subnets
C       10.242.1.0 is directly connected, FastEthernet0/1
B       10.242.2.0 [20/0] via 192.168.1.1, 00:27:08
     192.168.1.0/30 is subnetted, 1 subnets
C       192.168.1.0 is directly connected, FastEthernet0/0
S*   0.0.0.0/0 [1/0] via 192.168.1.1
2621A#show ip int brief
Interface                  IP-Address      OK? Method Status

 Protocol
FastEthernet0/0            192.168.1.2     YES manual up

 up
FastEthernet0/1            10.242.1.1      YES manual up

 up
2621C#show ip route
Codes: C - connected, S - static, I - IGRP, R - RIP, M - mobile, B - BGP
       D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area
       N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2
       E1 - OSPF external type 1, E2 - OSPF external type 2, E - EGP
       i - IS-IS, L1 - IS-IS level-1, L2 - IS-IS level-2, ia - IS-IS
inter
area
       * - candidate default, U - per-user static route, o - ODR
       P - periodic downloaded static route

Gateway of last resort is 192.168.2.1 to network 0.0.0.0

     10.0.0.0/24 is subnetted, 2 subnets
B       10.242.1.0 [20/0] via 192.168.2.1, 00:23:37
C       10.242.2.0 is directly connected, Ethernet0/1
     192.168.2.0/30 is subnetted, 1 subnets
C       192.168.2.0 is directly connected, Ethernet0/0
S*   0.0.0.0/0 [1/0] via 192.168.2.1

2651XM1#show ip route vrf customer1

Routing Table: customer1
Codes: C - connected, S - static, R - RIP, M - mobile, B - BGP
       D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area
       N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2
       E1 - OSPF external type 1, E2 - OSPF external type 2
       i - IS-IS, su - IS-IS summary, L1 - IS-IS level-1, L2 - IS-IS
level-2
       ia - IS-IS inter area, * - candidate default, U - per-user static
route
       o - ODR, P - periodic downloaded static route

Gateway of last resort is not set

     10.0.0.0/24 is subnetted, 2 subnets
B       10.242.1.0 [20/0] via 192.168.1.2, 00:29:08
B       10.242.2.0 [200/0] via 204.177.181.252, 00:17:55
     192.168.1.0/30 is subnetted, 1 subnets
C       192.168.1.0 is directly connected, FastEthernet0/0

2651XM2#show ip route vrf customer1

Routing Table: customer1
Codes: C - connected, S - static, R - RIP, M - mobile, B - BGP
       D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area
       N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2
       E1 - OSPF external type 1, E2 - OSPF external type 2
       i - IS-IS, su - IS-IS summary, L1 - IS-IS level-1, L2 - IS-IS
level-2
       ia - IS-IS inter area, * - candidate default, U - per-user static
route
       o - ODR, P - periodic downloaded static route

Gateway of last resort is not set

     10.0.0.0/24 is subnetted, 2 subnets
B       10.242.1.0 [200/0] via 204.177.181.253, 00:15:45
B       10.242.2.0 [20/0] via 192.168.2.2, 00:15:13
     192.168.2.0/30 is subnetted, 1 subnets
C       192.168.2.0 is directly connected, FastEthernet0/0




Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=72807&t=72764
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]

Reply via email to