Make sure lmi is being exchanged. Turn on keepalives for the pvc.
-----Original Message----- From: Maximus [mailto:[EMAIL PROTECTED] Sent: Thursday, July 24, 2003 11:13 AM To: [EMAIL PROTECTED] Subject: Frame Relay Back To Back Static PVC [7:72869] Per these instructions, I am able to bring my frame connection online: http://www.cisco.com/warp/public/125/frbacktoback.html However when I intentionally break the connection (Pull the Cable) the PVC doesn't automatically come back up. Is it because its static to begin with? I know I'm probably missing something very obvious but could you explain why the interface does not come back online after being reconnected? So far, the only way I can get the connection back online is by using a hard/software configured loopback and removing it at which point I'm up, up. Thanks. BTW Using IOS versions 12.1(20) and 11.2(26)P4. Configs are identical to the instructions. Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=72872&t=72869 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
