I boot my MSFC2 in the lab off of slot0 and it works fine!! Get a console connection on the sup and do a "switch con 15". Then do a reload and see why it is failing.
If your MSFC is in the boot mode you do need to bring up an active VLAN or you will never get the image off of the sup-slot0. Dave Alberto J. Garcia wrote: > Hi all !! > I need to make an upgrade on the a 65094s MSFC2 due to sevral crashes I had > in the last days. > > The problem is that the recommended image doesn't fit on the msfc's > bootflash. I tried to boot loading the image from the Supervisor slot0: , as > suggested on the Cisco manuals, but it was not possible to get the image > from there in the boot process. > > The comand I use : boot system flash sup-slot0:c6msfc2.xxxxx.bin , didn't > work (taken from Cisco site) > > The I tried to load the image from a TFTP server, it also didn't work. What > I discover was that the boot image wasn't processing ip !! > I wasn't able to even ping the TFTP server. > > Command used in this case : boot system tftp://a.b.c.d/c6msfc2.xxxxx.bin > > The boot image I used : c6msfc2-boot-mz.121-5c.E8 > > Any help will be appreciatted ...... > > > Alberto Garcia > Network Manager > OPTIGLOBE Argentina -- David Madland CCIE# 2016 Sr. Network Engineer Qwest Communications 612-664-3367 "Government can do something for the people only in proportion as it can do something to the people." -- Thomas Jefferson Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=72968&t=72959 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
