""J B"" wrote in message news:[EMAIL PROTECTED] > I'm not really familiar with IPX and I have to connect 3 remote branches to > a central site where the Novell server is located. > Can anybody point me to some sample configurations.
easy enough to do. IPX was my first love and not a lot of trouble at all, particularly if you are just going to do IPX RIP turn on IPX routing on each local router: ipx routing ( global config ) Then you need and IPX network number on each WAN link. ipx network aabbcc ( interface config ) on the ethernet link your IPX netowrk command should also include the switch that matches the IPX net encapsulation your workstations are using. ipx network ccaa encap sap, for example. check how things are done at the central site. at this point IPX RIP routing is raring to go. there are lots of subtleties, but this basic config should do geez, its been a while. I actually had to look up some of these :-> > > Thanks > JB Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=73130&t=73113 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
