I'm not sure if this works but I think both serial interfaces of the DTEs
should be on the same subnet, right? on router B, try changing the ip
address to 192.168.3.2... I think it might work that way.
Kenneth
"Barry Reyes" <[EMAIL PROTECTED]> wrote in message
EB42F51E5B65D411BF2E0008C73B48011EAFB2@BSTNT1000">news:EB42F51E5B65D411BF2E0008C73B48011EAFB2@BSTNT1000...
> Hello Everyone,
>
> I am having an issue with configuring my Frame Relay Switch. This seemed
to
> have worked before I physically moved the equipment. The reason I say
this
> is because typing 'show frame-relay pvc' from the switch produces PVC
STATUS
> = INACTIVE now after the move.
>
> Could my ports be damaged? Maybe I am overlooking something in my
> configuration. Here are the configurations I am using for my testing
> environment:
>
> Cisco 2503
>
> Current configuration:
> !
> version 11.2
> no service password-encryption
> no service udp-small-servers
> no service tcp-small-servers
> !
> hostname FrameSwitch
> !
> !
> frame-relay switching
> !
> interface Ethernet0
> no ip address
> no shutdown
> !
> interface Serial0
> no ip address
> encapsulation frame-relay ietf
> clockrate 64000
> frame-relay lmi-type ansi
> frame-relay intf-type dce
> frame-relay route 100 interface serial1 101
> no shutdown
> !
> interface Serial1
> no ip address
> encapsulation frame-relay ietf
> clockrate 64000
> frame-relay lmi-type ansi
> frame-relay intf-type dce
> frame-relay route 101 interface serial0 100
> no shutdown
> !
> interface bri0
> no ip address
> shutdown
> !
> no ip classless
> !
> !
> line con 0
> line aux 0
> line vty 0 4
> login
> !
> end
>
>
> Cisco 2102
>
> Current configuration:
> !
> version 11.2
> sevice timestamps debug datetime localtime
> no service password-encryption
> no service udp-small-servers
> no service tcp-small-servers
> !
> hostname RouterA
> !
> !
> !
> interface Ethernet0
> no ip address
> shutdown
> !
> interface Serial0
> ip address 192.168.2.1 255.255.255.0
> encapsulation frame-relay ietf
> frame-relay lmi-type ansi
> frame-relay route map ip 192.168.3.1 100 broadcast
> no keepalive
> no shutdown
> !
> no ip classless
> !
> !
> line con 0
> line aux 0
> line vty 0 4
> login
> !
> end
>
>
> Cisco 3102
> Current configuration:
> !
> version 11.1
> service udp-small-servers
> service tcp-small-servers
> !
> hostname RouterB
> !
> !
> !
> interface Serial0
> ip address 192.168.3.1 255.255.255.0
> encapsulation frame-relay ietf
> frame-relay lmi-type ansi
> frame-relay route map ip 192.168.2.1 101 broadcast
> no keepalive
> no shutdown
> !
> interface TokenRing0
> no ip address
> shutdown
> !
> no ip classless
> logging buffered
> !
> line con 0
> line aux 0
> line vty 0 4
> login
> !
> end
>
> ___________________________________
> UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
> FAQ, list archives, and subscription info: http://www.groupstudy.com
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
> ---
___________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
