Steven Aiello wrote: > > Ok, > > I haven't gotten much of a bit on my access list question. > But no > worries I have a book and I'm going to try it my self. However > can any > on give me a list run down of the ports needed for a VPN?
I didn't see your first message so I don't know what you're trying to accomplish, so if this message is a non sequitor, I apoligize... > > exp > > IPSec portx tcp IPSec doesn't use TCP ports. It uses IP protocol numbers. There are two types: The Authentication Header (AH) and Encapsulating Security Payload (ESP). AH uses IP protocol number 51 ESP uses IP protocol number 50 > Lt\2TP porty tcp You can run L2TP over UDP, in which case UDP port number 1701 is used. See RFC 2661 for more info. Talk to you later, Priscilla > > I would greatly apprecate the help > > I am very new to the VPN side and I want to be sure I don't > over look > any thing > > Steven > > Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=73292&t=73290 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
