Assign an address (as secondary) from the incorrect range to the router interface to which this device is connected, and from that router, connect (telnet or ssh) to that device, fix the ip, (get disconnected in process, of course), and remove the incorret secondary from the router...voila and other French words I don't understand.
""John Neiberger"" wrote in message news:[EMAIL PROTECTED] > You have a device that is reachable only via telnet or console that you've > preconfigured with an IP address, subnet mask, and default gateway and > subsequently shipped out to a remote location to be installed. Once the > device was in place you realized that you've configured it with the wrong > addressing information. The subnet you used actually exists at another > location so this device is currently unreachable via IP. If you could > somehow reach the device you'd be able to correct your mistake without > having someone ship the device back to you. > > What can you do to restore IP connectivity to this device in its current > location and make it reachable from both the local router and remote > routers? > **Please support GroupStudy by purchasing from the GroupStudy Store: > http://shop.groupstudy.com Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=73377&t=73370 -------------------------------------------------- **Please support GroupStudy by purchasing from the GroupStudy Store: http://shop.groupstudy.com FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
