>From the CCIE Power Session: "Unless a question says so, you are not permitted to use**:
Static routes (of any kind) Default routes **Dynamic routes to null are permitted" Floating statics are also allowed: "ip route 2.2.2.0 255.255.255.0 1.1.1.2 240 * Uses a higher administrative distance so that dynamic protocols will take precedence * Use only if explicitly allowed in a test question * Make sure the dynamic route actually exists when DDR is not active" HTH, Fred Reimer - CCNA Eclipsys Corporation, 200 Ashford Center North, Atlanta, GA 30338 Phone: 404-847-5177 Cell: 770-490-3071 Pager: 888-260-2050 NOTICE; This email contains confidential or proprietary information which may be legally privileged. It is intended only for the named recipient(s). If an addressing or transmission error has misdirected the email, please notify the author by replying to this message. If you are not the named recipient, you are not authorized to use, disclose, distribute, copy, print or rely on this email, and should immediately delete it from your computer. -----Original Message----- From: Shab Hanon [mailto:[EMAIL PROTECTED] Sent: Tuesday, August 05, 2003 5:30 AM To: [EMAIL PROTECTED] Subject: OSPF summary address with Null 0 [7:73500] Hi everybody The case .. OSPF summary address with Null 0 In all the case studies for CCIE R & S we told don't use static routes! . While we need to have a static route to Null 0 with address summarization. "Page 548 Routing TCP/IP Vol. 1 The catch J What we do? What is the best? Any idea??? Cheers, Shab. **Please support GroupStudy by purchasing from the GroupStudy Store: http://shop.groupstudy.com FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=73507&t=73500 -------------------------------------------------- **Please support GroupStudy by purchasing from the GroupStudy Store: http://shop.groupstudy.com FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
