I have never seen a c4224, but this sounds like the config register is not set properly (see also password recovery).
Thanks, Zsombor Robert Kimble wrote: > > I know these are discontinued and I would do well not to use > them, but.... > > The company I work for has 3 of them laying around and they > want me to build a test network using them. > > I've been playing around with one and I can't seem to save the > running config?! > > I've read the software config documents on cisco.com and tried > both copy run start and write mem. > > Both say they are building the config and then [ok]. > > c4224#copy run start > Destination filename [startup-config]? > Building configuration... > [OK] > c4224# > > (then just for the heck of it): > > c4224#write mem > Building configuration... > [OK] > c4224# > > Now if I reload or power cycle the c4224 it doesn't save the > config. > > It just askes me if I want the initial config dialog and the > prompt goes back to "gateway". > > Also, when I create vlans they don't show up in the "show vlan" > command. But that's another issue I guess. > > Any way, has anyone else had problems saving their configs on a > c4224? > > -Bobby > > > > > > Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=73529&t=73517 -------------------------------------------------- **Please support GroupStudy by purchasing from the GroupStudy Store: http://shop.groupstudy.com FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
