Are you saying that the xxx octets are the same (i.e. A.B.C.1 and A.B.C.2)?
If so, then you are trying to tell the router that its Ethernet interface
and its Serial interface are connected to the same network, which is almost
certianly not the case... Why would you want to do such a thing?
Since Howard didn't say it, I will:
What is the problem that you are trying to solve by forcing the router to
believe that these interfaces are on the same network?
Dale
[=`)
>From: "Howard C. Berkowitz" <[EMAIL PROTECTED]>
>Reply-To: "Howard C. Berkowitz" <[EMAIL PROTECTED]>
>To: [EMAIL PROTECTED]
>Subject: Re: Strange one (for me at least)
>Date: Tue, 8 Aug 2000 12:59:18 -0400
>
>>Greetings,
>>
>>I've have a 2500 router, I was giving the Ethernet interface ip
>>xxx.xxx.xxx.1, and the serial interface xxx.xxx.xxx.2. The router came
>>back
>>with an error message the ip addresses are overlapping. Any idea why this
>>happens and can I force the router to accept it.
>>
>>Thank you,
>>
>>Nabil
>
>
>What is your subnetting plan? The answer to the problem lies in subnetting.
>
>Why do you want to force the router to accept it?
>
>___________________________________
>UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
>FAQ, list archives, and subscription info: http://www.groupstudy.com
>Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
________________________________________________________________________
Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com
___________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
