Looked this up on Software Advisor...it listed feature sets primarily with an Enterprise flavor, as well as a few VoIP, Telco, and Service Provider flavors. What I got out of the whole thing was that the IP only feature set will not cut it. IS-IS speakers natively use CLNS to communicate even as they route IP. I used to get it with the Desktop feature, though I did not see that as an option here.
Cisco provides a nice basic example of ISIS here at http://www.cisco.com/en/US/customer/tech/tk365/tk381/technologies_configurat ion_example09186a0080093f38.shtml If you are interested in having it route both IP and CLNS...use Integrated ISIS...more info at http://www.cisco.com/en/US/customer/products/sw/iosswrel/ps1835/products_con figuration_guide_chapter09186a00800c5bc1.html#wp1000871 HTH, Charles ""irfan siddiqui"" wrote in message news:[EMAIL PROTECTED] > I am trying to run ISIS on a 2600 series router however it does not accept > the CLNS and ISIS routing commands at the Config mode. I am using IOS IP > version only? Do i need IP plus version to configure ISIS?? > > Thanks > > _________________________________________________________________ > The new MSN 8: smart spam protection and 2 months FREE* > http://join.msn.com/?page=features/junkmail > **Please support GroupStudy by purchasing from the GroupStudy Store: > http://shop.groupstudy.com > FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=74057&t=74051 -------------------------------------------------- **Please support GroupStudy by purchasing from the GroupStudy Store: http://shop.groupstudy.com FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
