Hi Mohammad, You can not really switch an ATM PVC on a router, you need to have a switch (popularly called WAN Switch) for that. But even then, if you have 2 ATM PVCs facing different sides, you can exchange traffic between them, by IP routing. e.g. you have one PVC configured on interface atm 1/0 with IP 10.10.1.1/30 and another interface atm 1/1 with IP 10.10.2.1/30. Now both these interfaces will be talking to their respective counterparts on the other side, but on the router you can simply configure adequate IP routing and the router will get ATM cells from atm 1/0, convert them to IP packets, hand them to in IP shape to atm 1/1, which will again convert the IP packets to ATM cells and those cells will be sent out to remote location.
Please revert in case more information is required. HTH Vikram -----Original Message----- From: Mohamed Saro [mailto:[EMAIL PROTECTED] Sent: Monday, August 18, 2003 2:08 PM To: [EMAIL PROTECTED] Subject: ATM PVCs Switching on Router 7200 [7:74094] Can I switch PVC coming from on ATM interface to be connected to another PVC on another interface on the same 7200 router? Any configuration guidelines? **Please support GroupStudy by purchasing from the GroupStudy Store: http://shop.groupstudy.com FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=74108&t=74094 -------------------------------------------------- **Please support GroupStudy by purchasing from the GroupStudy Store: http://shop.groupstudy.com FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
