I did this same thing but much cheaper. I had a Xyplex terminal server.
Configured each port as needed and cabled to the various console ports.
Built a menu so I could telnet or dial into the terminal server and choose
which device I wanted to connect to. Worked great. You can do the same
thing with an Equinox terminal server, just another brand name.
Dave
-----Original Message-----
From: Patrick Stiever [mailto:[EMAIL PROTECTED]]
Sent: Tuesday, August 08, 2000 12:31 PM
To: '[EMAIL PROTECTED]'
Subject: Need recomendation
Ladies and Gentleman,
I need another recommendation, I have about a dozen or so routers,
LocalDirectors, and Switches here at our HQ, I would like to buy something
like a 2509 router so I can hook them up from their console port to the
2509's async port. That way I don't have to run back to the NOC with
laptop, cable, and try to console in. Basically, I need a info on what
piece of equipment would be best suited for this application. Thanks again.
Patrick Stiever
Communications Engineer
24 Hour Fitness
(760) 918 4459
[EMAIL PROTECTED]
___________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
___________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
