Hello there This what I know FECNs and BECNs are traffic notifications used by a Switch in this case Frame Relay switch..to notify end nodes i.e routers. Routers will only reduce the rate of traffic transmission but it won't stop...But if the router is configured for Frame Relay trffic-shapening the FECN or BECN counters will reduce or controlled thus stop increasing....in short router has to be Frame Relay traffic-shapening configured if the FECN has to reducing its counters......Hope that helps....
Thank you Ollie AT&T Common Backbone 866-397-7309 Opt 1 -----Original Message----- From: Md Nazri [mailto:[EMAIL PROTECTED] Sent: Tuesday, September 02, 2003 3:39 AM To: [EMAIL PROTECTED] Subject: in FECN [7:74642] hi guys, this is the output of my sh frame-relay pvc DLCI = 171, DLCI USAGE = LOCAL, PVC STATUS = ACTIVE, INTERFACE = Serial0/0.171 input pkts 1435560 output pkts 9358712 in bytes 370699089 out bytes 1069864391 dropped pkts 0 in pkts dropped 0 out pkts dropped 0 out bytes dropped 0 in FECN pkts 7738 in BECN pkts 56 out FECN pkts 0 out BECN pkts 0 in DE pkts 0 out DE pkts 0 out bcast pkts 193438 out bcast bytes 12380032 5 minute input rate 20000 bits/sec, 7 packets/sec 5 minute output rate 13000 bits/sec, 12 packets/sec pvc create time 1w6d, last time pvc status changed 4d00h what will happen if 'in FECN' is increasing..how do router adapt to it..? thanks **Please support GroupStudy by purchasing from the GroupStudy Store: http://shop.groupstudy.com FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=74665&t=74642 -------------------------------------------------- **Please support GroupStudy by purchasing from the GroupStudy Store: http://shop.groupstudy.com FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
