Can you post your configurations for this? What area is R5 in? Why are you skipping over R5 as the end of the virtual-link?
-- Bill Lijewski CCIE #8642 ""Jens Petter Eikeland"" wrote in message news:[EMAIL PROTECTED] > Hi group , > > I have been working on a backup solution with isdn and the primary is a > frame link > I am running on an 2500 with 12.1(18) and a 2500 with 12.(18) > > Thi is my net. > > R6---------R1======R5----------R4--------R2----- > > R6------------------------------------r4 > > ---- is frame-relay net > > == is isdn link > > Area 0 is R6 to R1, > Area 1 is from r6down to r4 > Area 2 is from R4 and to R2 > > My primary virtual link is from R6 to R4 > My backup primary is from R1 to R4 > > What happens her is that the backup virtual link wont come up over the isdn > link. > I have tested this both with and without demand circuit, dialer watch and > without any of them. > > My config is correct and my authentication is correct. I have also tested > this without authentication. > > The strange thing is that this has happen to me on two different rack. I > have had several people go > Over this, but they cant find any thing wrong > > Is there anywon hwo knows if there is an bug in this software with regards > to this.?? > > JP > **Please support GroupStudy by purchasing from the GroupStudy Store: > http://shop.groupstudy.com > FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=74814&t=74804 -------------------------------------------------- **Please support GroupStudy by purchasing from the GroupStudy Store: http://shop.groupstudy.com FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
