Different approach: Howmany clients? Static Nat on the router the other way around?
Give the server a route pointer to the nat router for the client. You even can choose to give the client a global ip to connect to the server with, like a mail server for example. Martijn -----Oorspronkelijk bericht----- Van: alaerte Vidali [mailto:[EMAIL PROTECTED] Verzonden: maandag 8 september 2003 18:50 Aan: [EMAIL PROTECTED] Onderwerp: NAT and SAP [7:74982] When a SAP client tries to connect to a SAP server through a router with NAT enabled there is a problem: the SAP server sends an IP embedded on the payload of the packet, and the NAT router do not translate it. Any suggestion? **Please support GroupStudy by purchasing from the GroupStudy Store: http://shop.groupstudy.com FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html **Please support GroupStudy by purchasing from the GroupStudy Store: http://shop.groupstudy.com FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=75276&t=74982 -------------------------------------------------- **Please support GroupStudy by purchasing from the GroupStudy Store: http://shop.groupstudy.com FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
