Straight from the documentation. [no] compress [predictor | stac] To configure software compression for Link Access Procedure, Balanced (LAPB), Point-to-Point Protocol (PPP), and High-Level Data Link Control (HDLC) encapsulations, use the "compress" interface configuration command. To disable compression, use the "no" form of the command. predictor (Optional) Specifies that a predictor compression algorithm will be used on LAPB and PPP encapsulation. stac (Optional) Specifies that a Stacker (LZS) compression algorithm will be used on HDLC and PPP encapsulation. > -----Original Message----- > From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]] > Do somebody happen to know what the compress command on the serial > interface means ?? > > > 10x > > GIL > > CCNA,CCDA ___________________________________ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
